Roof Drip Edge Installation Tips



Every rainy season, the walls of your home become a breeding place for moss and mold. This is since water from the roofing straight drips onto the walls, making them damp, which brings in fungal development. To prevent this, you need proper roof, which can prevent this damage. This is where drip edge originates. Drip edge is an L-shaped galvanized strip of metal fixed to the roof of homes to enable complimentary flow of water from the ceiling into the drain system on the ground. This is an exceptional drainage solution as it avoids the build-up of water on the roofing system. Drip edge can be installed on any type of roofing, like fiberglass and metal roof. It prevents damage of the fascia and roofing edges due to accumulation of water. For this reason, drip edge is a vital addition to every house.



Guidelines for Setting Up Drip Edge

The roofing should be prepared in advance before setting up the drip edge and should have an underlayment of organic felt paper. If you are preparing a roofing system repair or setting up a new drip edge, follow these steps that will help you.

Before you get into the job, acquire the needed paraphernalia from any hardware store. Considering that drip edge is readily available in a variety of colors and https://www.amconj.com/roofing/cherry-hill/ sizes, pick one that might be suitable for your house. Get the size that will cover your roofing system sheeting fully.

With the assistance of iron nails, repair the edging to the sheeting of the roofing system firmly. Safe and secure nails after every 18 to 20 inches to hold the drip edge in place.

Location the 2nd sheet on the first and hammer the nail at the point of intersection. After joining the two sections, secure the sheet in the same way, leaving a space of 18 inches in between every roof nail. The succeeding sheets must be fixed in the same manner till the entire perimeter of the roof is covered.

If you are fixing drip edges on roofing shingles or gabble roofings, ensure you install a water and ice guard, so that it might secure from leakage. The drip edge must be set up from the bottom and moving upwards. The gables need to be overlapped effectively to prevent spaces in between them.

In case you have rain gutters on the roof, install the drip edge's face lower than the upper suggestion of the wood rain gutter. This position of the drip edge ensures that the water leaks into the rain gutter to be reached the ground, without damaging the walls. When the installation is complete, make sure that there are no misalignments or gaps. You can also paint the drip edge to match the outside paint of your home.

Leak edge setup after shingles can likewise be done in the same manner. You can likewise set up drip edges on the roofing system of your shed or garage following these instructions. Drip edges on the roofing are a worth addition to any house, so get it done ASAP.


Leave a Reply

Your email address will not be published. Required fields are marked *